Introducing Tensorgrip® G67 - the innovative adhesive system for carpet tile, VCT, and LVT/LVP backings. Contact Quin Global for distribution and/or direct sales options.
Tensorgrip® G67 is a water-based, spray grade pressure sensitive flooring adhesive. This unique, portable canister system has been shown to decrease installation times by as much as 70% when compared to troweled or rolled-on adhesives. Plus, it can be applied while standing, rather than a kneeled position.
Watch the product in action using different substrates, learn about accessories, and how to care and maintain the adhesive.
Refer to the photos below as a visual guide for product application.
CARPET TILE SPRAY COVERAGE:
6,000 sq ft per 22ltr canister (CT)
4,000 sq ft per 22ltr canister (LVT)
160-200 sq ft per aerosol can (CT & LVT)
Tensorgrip® G67 allows flooring to be laid into wet adhesive remaining repositionable during installation.
Flooring can be installed immediately after spraying Tensorgrip® G67, rather than waiting hours for troweled or rolled-on adhesives to dry.
Tensorgrip® G67 is delivered in a canister, and does not require an outside power source - making it portable and convenient on the job.
Since the adhesive can be applied while standing, it naturally reduces stress on the back, knees, and shoulders.
Tensorgrip® G67 has been proven to provide an excellent adhesion on most types of carpet tile, vinyl tile, vinyl plank, and underlayment.
I was very happy with the ease and speed of application of Tensorgrip® G67. Also very little overspray. I was impressed by the simplicity of the equipment. The reduced flash times made it possible for us to work smaller areas, and not tie up large areas of the jobsite waiting for adhesive to dry. I would use this adhesive on every job.
- Joe, Installer in San Antonio, TX -
Used product on 16,000 SF Interface carpet tile and 2,000 SF Mohawk LVP
Q: What is the recommended temperature range for spraying G67?
A: For best results, spray at 60 degrees and above.
Q: What temperature range can G67 be stored?
A: Do not store at temperatures above 120 degrees Fahrenheit or below freezing.
Q: Where can I get a list of substrates and materials that G67 has been tested with?
A: Due to the ever-changing nature of the list (we continue to add new substrates and materials each week) we encourage customers and those interested in this information to call the Tensorgrip® G67 product team at (402) 731-3636.
Q: How much maintenance is the gun and hose?
A: The gun, hose and tips are virtually maintenance free due to using a needle-style gun. If you will not be using the adhesive for a week or more, we recommend you spray a small amount of S104 adhesive remover into the spray tip – that’s it!
Q: How do you deal with manufacturer’s warranty?
A: Quin Global offers its own warranty. View the warranty information here or email our product team for more information at email@example.com.
Q: Where can I buy this product? Is it available through a distributor?
A: This product is available both direct and through distribution. If your local distributor does not yet carry or stock the product, please call or email our team and we can work with your network to ensure distribution in your area.
Want to see this product in action, or get a sample? Get in touch with a Tensorgrip® G67 representative.